KEY ADVANTAGES
Robust stainless steel housing
Works in any liquid or gaseous medium
Up to 200 bar operating pressure; higher pressure capacities optionally available
external ON/OFF switch
Selectable signal mode from 1:1 to 1:6 or continuous (depending on tool speed and required battery lifetime)
22/28 Hz frequency shift mode
Easy battery replacement
Standard operating temperatures from -20 to 85 °C
Transmitters available for pipes with an outside diameter of between 3" and 56"
THE SOLUTION
The System consists of two elements – a receiver with a handheld antenna (EPD II) and an ITX Transmitter. Because each component is equipped with its own batteries, neither charging nor an external power supply is required.
TECHNOLOGIES/KNOW-HOW
Since the Tool Locating And Tracking System is independent of the pipeline contents, it works equally well in any liquid such as crude oil, water, refined products as well as gases. It can be used in connection with a variety of pipeline commissioning and operation activities including; cleaning, flooding, dewatering, inspecting and batching.
Robust stainless steel housing
Works in any liquid or gaseous medium
Up to 200 bar operating pressure; higher pressure capacities optionally available
external ON/OFF switch
Selectable signal mode from 1:1 to 1:6 or continuous (depending on tool speed and required battery lifetime)
22/28 Hz frequency shift mode
Easy battery replacement
Standard operating temperatures from -20 to 85 °C
Transmitters available for pipes with an outside diameter of between 3" and 56"
THE SOLUTION
The System consists of two elements – a receiver with a handheld antenna (EPD II) and an ITX Transmitter. Because each component is equipped with its own batteries, neither charging nor an external power supply is required.
TECHNOLOGIES/KNOW-HOW
Since the Tool Locating And Tracking System is independent of the pipeline contents, it works equally well in any liquid such as crude oil, water, refined products as well as gases. It can be used in connection with a variety of pipeline commissioning and operation activities including; cleaning, flooding, dewatering, inspecting and batching.
