The DT-2 On/Off Tool is a tubing seal
receptacle allowing isolation of a lower
zone using a wireline blanking plug. The
tubing string can then be removed from
the well. When re-run, the tubing string
automatically re-engages to the stinger,
and the blanking plug can be retrieved by
wireline.
The DT-2 On/Off Tool is run above
an ASI-X Packer, a VSI-X Packer or a
Permapak Seal Bore Packer with a latch
seal mandrel.
NOTE: Stingers sold separately
Special Features
> Blanking plug seats in top of stinger to
prevent debris build-up
> Bonded seal allows disconnects and
re-connects
> Right-hand or left-hand release
> Milling shoe allows rotation through
debris
receptacle allowing isolation of a lower
zone using a wireline blanking plug. The
tubing string can then be removed from
the well. When re-run, the tubing string
automatically re-engages to the stinger,
and the blanking plug can be retrieved by
wireline.
The DT-2 On/Off Tool is run above
an ASI-X Packer, a VSI-X Packer or a
Permapak Seal Bore Packer with a latch
seal mandrel.
NOTE: Stingers sold separately
Special Features
> Blanking plug seats in top of stinger to
prevent debris build-up
> Bonded seal allows disconnects and
re-connects
> Right-hand or left-hand release
> Milling shoe allows rotation through
debris
