The CR Bridge Plug provides the end user
with tools that will consistently contain
well pressures at elevated temperatures
and pressures. This plug permits faster
removal from the well with either rotary
or cable tool methods due to its compact
size and the selection of high quality
construction material.
The short, compact, interlocked
construction assures the user that the
CR Bridge Plug will provide faster, safer
run-in, dependable set and pack-off
and hold pressure that is safe for the
casing weight and grade. The interlock
construction and compact size requires
minimal material removal during drill out.
The outside diameter of these products
has been held to a minimum to provide
maximum tool-to-casing clearance for safe running and maximum fluid by-pass
area during displacement procedures
even in heavy mud systems.
A Wireline Adapter Kit (WLAK) and
Hydraulic Setting Tool are used for
setting CR Bridge Plugs.
NOTE: The CR Bridge Plug is designed to
provide a temporary wellbore seal. For a
permanent wellbore seal, cement must
be set on top of the plug.
Special Features
> Convertible to Cement Retainer
> Sets on wireline or on tubing with
mechanical setting tool
with tools that will consistently contain
well pressures at elevated temperatures
and pressures. This plug permits faster
removal from the well with either rotary
or cable tool methods due to its compact
size and the selection of high quality
construction material.
The short, compact, interlocked
construction assures the user that the
CR Bridge Plug will provide faster, safer
run-in, dependable set and pack-off
and hold pressure that is safe for the
casing weight and grade. The interlock
construction and compact size requires
minimal material removal during drill out.
The outside diameter of these products
has been held to a minimum to provide
maximum tool-to-casing clearance for safe running and maximum fluid by-pass
area during displacement procedures
even in heavy mud systems.
A Wireline Adapter Kit (WLAK) and
Hydraulic Setting Tool are used for
setting CR Bridge Plugs.
NOTE: The CR Bridge Plug is designed to
provide a temporary wellbore seal. For a
permanent wellbore seal, cement must
be set on top of the plug.
Special Features
> Convertible to Cement Retainer
> Sets on wireline or on tubing with
mechanical setting tool
