The TM Anchor/Catcher is a retrievable
positive action anchor tool to hold tubing
strings in tension or compression during
pump strokes to prevent tubing buckling.
This increases pumping efficiency while
reducing rod and tubing wear. This tool
also catches the tubing should it part.
Stainless steel drag springs employ
low stress value to minimize failure
under corrosive conditions. If the TM
Anchor/Catcher cannot be released with
right-hand rotation, it is equipped with a
shear release activated by an upward pull.
Special Features
> Stainless steel drag springs
> Enclosed slips
> Rotation or shear release
> Safety release value easily adjusted
positive action anchor tool to hold tubing
strings in tension or compression during
pump strokes to prevent tubing buckling.
This increases pumping efficiency while
reducing rod and tubing wear. This tool
also catches the tubing should it part.
Stainless steel drag springs employ
low stress value to minimize failure
under corrosive conditions. If the TM
Anchor/Catcher cannot be released with
right-hand rotation, it is equipped with a
shear release activated by an upward pull.
Special Features
> Stainless steel drag springs
> Enclosed slips
> Rotation or shear release
> Safety release value easily adjusted
