The Omega High Expansion Gauge Hanger is used for hanging off gauges and other tools in a well. Designed for use in tubing with no nipple profiles, the gauge hanger provides a platform to hang gauges from while at the same time constituting a negligible flow restriction. The tool can also be used as an anchor to prevent unwanted movement of, for example, abandoned equipment in flowing wells.
Two bi-directional slip modules allow loads in either direction and self centralise the tool on setting. On retrieval the slips are positively retracted from the tubing/casing wall to their running position. The gauge hanger can be run on slickline or electric cable and is set using standard setting tools. Retrieval is with a JDC pulling tool for simplicity.
The gauge hanger comes in two chassis sizes: 1.5” and 2.0” OD`s. Conversion kits enable the gauge hanger to be set in a range of tubing sizes from 2-7/8” through to 7”.
Download Data sheet:
http://www.omega-completion.com/images/High-Expansion-Gauge-Hanger-Slider/High-Expansion-Gauge-Hanger.pdf
Video:
https://youtu.be/-uv24RVn5QU
Two bi-directional slip modules allow loads in either direction and self centralise the tool on setting. On retrieval the slips are positively retracted from the tubing/casing wall to their running position. The gauge hanger can be run on slickline or electric cable and is set using standard setting tools. Retrieval is with a JDC pulling tool for simplicity.
The gauge hanger comes in two chassis sizes: 1.5” and 2.0” OD`s. Conversion kits enable the gauge hanger to be set in a range of tubing sizes from 2-7/8” through to 7”.
Download Data sheet:
http://www.omega-completion.com/images/High-Expansion-Gauge-Hanger-Slider/High-Expansion-Gauge-Hanger.pdf
Video:
https://youtu.be/-uv24RVn5QU
