The Hydro MACS is a circulation tool that can be used for multiple applications including clean-up or drilling operations to improve circulation and assist with hole cleaning. It is the ideal tool for those wells where deviation and geometry create the risk of solids accumulation that can be detrimental to operations. Once opened, the device allows higher annular velocities to be achieved without compromising pressures, allowing turbulent flow to significantly improve solids removal.
The tool has two primary positions: open and closed. In the open divert mode the collets are pulled into the stroke closed position closing off the lower string preventing the well pressure or under balanced fluid from returning up the work string and allowing circulation through the ports.
In the closed position the collets are pulled into the stroke open position directing the flow from the drill pipe to the annulus via the bit and preventing back pressure. The Hydro MACS can be easily opened and closed multiple times by dropping balls from the surface to activate the positioning sleeve making it reliable and simple to use
The tool has two primary positions: open and closed. In the open divert mode the collets are pulled into the stroke closed position closing off the lower string preventing the well pressure or under balanced fluid from returning up the work string and allowing circulation through the ports.
In the closed position the collets are pulled into the stroke open position directing the flow from the drill pipe to the annulus via the bit and preventing back pressure. The Hydro MACS can be easily opened and closed multiple times by dropping balls from the surface to activate the positioning sleeve making it reliable and simple to use
