Dril-Quip DX Subsea Connectors are designed for deep water, high wellhead pressure, deep wells and long drilling times. They are available in a variety of designs and configurations and can be modified to meet specific customer requirements. The DX-10 Connector is pressure rated to 10,000 psi, and the DX-15 is pressure rated to 15,000 psi.
These connectors are ideally suited for use with a subsea BOP stack or Subsea Completion Tree. The DX Wellhead Connectors are designed to provide high bending, high tensile and high pressure capacity while remaining easy to operate and install.
• High bending and tension capacity
• High load capacity
• Simple, reliable, trouble-free operation
• Unique latching segments provide uniform load distribution
• Top connection can be a clamp, flange or stud
• ded connection
• Special seal design and stainless steel surfaces extend seal life
• Easily retrofitted into any subsea BOP stack
• Latching segments automatically retract when the connector is unlocked
• Quick unlatching time; meets all international regulatory requirements
• DX seal ring with primary metal-to-metal sealing and emergency back-up, metal-to-metal sealing profile
• Ideal for subsea production systems
• Ring gasket retaining mechanism provides simple, reliable remote gasket installation and removal
• Large lock and unlock porting for quick response
• DX-DW Connectors available for deepwater, higher preload requirements
• Field-proven performance
Link to page:
http://www.dril-quip.com/dx_wellhead_connector.html
These connectors are ideally suited for use with a subsea BOP stack or Subsea Completion Tree. The DX Wellhead Connectors are designed to provide high bending, high tensile and high pressure capacity while remaining easy to operate and install.
• High bending and tension capacity
• High load capacity
• Simple, reliable, trouble-free operation
• Unique latching segments provide uniform load distribution
• Top connection can be a clamp, flange or stud
• ded connection
• Special seal design and stainless steel surfaces extend seal life
• Easily retrofitted into any subsea BOP stack
• Latching segments automatically retract when the connector is unlocked
• Quick unlatching time; meets all international regulatory requirements
• DX seal ring with primary metal-to-metal sealing and emergency back-up, metal-to-metal sealing profile
• Ideal for subsea production systems
• Ring gasket retaining mechanism provides simple, reliable remote gasket installation and removal
• Large lock and unlock porting for quick response
• DX-DW Connectors available for deepwater, higher preload requirements
• Field-proven performance
Link to page:
http://www.dril-quip.com/dx_wellhead_connector.html
