The BigBore II-H series Subsea Wellhead Systems are Dril-Quip’s next generation wellhead system designed for deepwater, deep well applications. The BigBore II-H System features higher load carrying capacity and higher temperature ratings. It has been designed to facilitate the drilling of wells that penetrate shallow water flow zones and require several casing strings to accommodate small pore pressure/fracture-gradient differentials.
System Features:
• All 18-3/4" BigBore II-H components certified to API 17D 2nd Edition and 6A specifications
• SS-20 Wellhead housing designed for 20,000 psi and 8.8 million lbs of end-load carrying capacity, a nominal 30" O.D. and a 350°F temperature rating
• SS-15 Wellhead housing designed for 15,000 psi and 8.8 million lbs of end-load carrying capacity, a nominal 27" O.D. and a 300°F temperature rating
• High-tensile, high-bending, high-load and high-pressure capacity
• Incorporates ROV-assisted annulus shut-off monitoring system
• Utilizes two 22" adapters for landing 18" and 16" supplemental casing hanger systems
• Wellhead can pass 18" and 16" casing, casing hangers and testable/retrievable/replaceable seal assemblies inside standard 21" O.D. riser and 18-3/4" BOP stack
• All casing hangers and seal assemblies are run, set and tested on drill pipe in a single trip
• Two million lbs preloaded rigid lockdown wellhead system
• Utilizes Dril-Quip’s reliable high-temperature, weight-set metal-to-metal seal assembly
• Large cement return flow-by areas on all casing hanger systems
• Bit-runnable wear sleeves and wear bushings available
• Alternative casing programs available
Link to page:
http://www.dril-quip.com/ss20_ss15bbiih_subsea_wellhead.html
System Features:
• All 18-3/4" BigBore II-H components certified to API 17D 2nd Edition and 6A specifications
• SS-20 Wellhead housing designed for 20,000 psi and 8.8 million lbs of end-load carrying capacity, a nominal 30" O.D. and a 350°F temperature rating
• SS-15 Wellhead housing designed for 15,000 psi and 8.8 million lbs of end-load carrying capacity, a nominal 27" O.D. and a 300°F temperature rating
• High-tensile, high-bending, high-load and high-pressure capacity
• Incorporates ROV-assisted annulus shut-off monitoring system
• Utilizes two 22" adapters for landing 18" and 16" supplemental casing hanger systems
• Wellhead can pass 18" and 16" casing, casing hangers and testable/retrievable/replaceable seal assemblies inside standard 21" O.D. riser and 18-3/4" BOP stack
• All casing hangers and seal assemblies are run, set and tested on drill pipe in a single trip
• Two million lbs preloaded rigid lockdown wellhead system
• Utilizes Dril-Quip’s reliable high-temperature, weight-set metal-to-metal seal assembly
• Large cement return flow-by areas on all casing hanger systems
• Bit-runnable wear sleeves and wear bushings available
• Alternative casing programs available
Link to page:
http://www.dril-quip.com/ss20_ss15bbiih_subsea_wellhead.html
