Well to Surface Cable Outlet
The Tendeka electrical monitoring system comprises a range of downhole pressure gauges and surface equipment which provide high-resolution permanent monitoring of well pressure, temperature and performance.
The Tendeka range of wellhead outlets provides the surface termination for a single conductor 0.250” TEC line through the wellhead to the downhole gauges below.
Installation is usually into the wellhead or wellhead support collar, although other connection points can be accommodated.
The 5k wellhead outlet provides a compact, easy to install quality electrical connection for installation in wellheads with 0.5”, 0.75” and 1.0” NPT outlets.
The wellhead outlet allows for the termination of the downhole TEC at the wellhead. The cable is typically passed through the NPT fitting on the bonnet, into which the lower part of the wellhead outlet is fitted. The upper enclosure is fitted to the TEC termination assembly, and a surface cable is run back to the surface acquisition unit.
For more specifications:
http://www.tendeka.com/products/guardian-wellhead-outlet/
The Tendeka electrical monitoring system comprises a range of downhole pressure gauges and surface equipment which provide high-resolution permanent monitoring of well pressure, temperature and performance.
The Tendeka range of wellhead outlets provides the surface termination for a single conductor 0.250” TEC line through the wellhead to the downhole gauges below.
Installation is usually into the wellhead or wellhead support collar, although other connection points can be accommodated.
The 5k wellhead outlet provides a compact, easy to install quality electrical connection for installation in wellheads with 0.5”, 0.75” and 1.0” NPT outlets.
The wellhead outlet allows for the termination of the downhole TEC at the wellhead. The cable is typically passed through the NPT fitting on the bonnet, into which the lower part of the wellhead outlet is fitted. The upper enclosure is fitted to the TEC termination assembly, and a surface cable is run back to the surface acquisition unit.
For more specifications:
http://www.tendeka.com/products/guardian-wellhead-outlet/
